FW-1120 is a stand-alone network camera server with built-in CMOS camera and web server which deliver crip real time live videos at a rate up to 30fps over the network.
FW-1120 is designed to meet need for small sized or medium sized facility monitoring as well as home application, simply connect it to existing network and assign IP address and view from any where and any time trough standard web browser.
High performance of video transmission
30fps(NTSC)/25FPS(PAL) at CIF video format.
Built-in Motion detection
Built-in motion detection feature.
Simple alarm notification service
Alarm e-mail notification to specified email address by simple sensor triggering condition.
Pure WEB based monitoring & recording solution
Use only standard web browser to view live video stream on any O/S such as Windows, Mac, Linux, Unix, etc.
Has built-in CMOS camera and web server. Thus, only IP address assigment is required to view live video stream anytime and anywhere.
High Quality video and fast video stream
High quality video stream from VGA CMOS and up to 30fps video transmission speed.
Remote System management
All the system configuration and upgrade can be done remotely over the TCP/UP network.
Dynamic IP Support.
| Model || FlexWatch 1120|
|Video Compression ||M-JPEG|
|Compression Level||6 levels (low compression/ highest/ high/ normal/ low/ lowest)
|Live Casting||Up to 30 fps @ 320x240 when simplex|
|Network through-put control||Frame rate control|
Notification service through E-mail/alarm output
|Dynamic IP support||AOIPTM|
|Security||Administrator authority/user authority|
|Software (default Web interface)||Live-cast through Web browser|
(Minimum PC requirement-XP, 2000, Vista/ IE 6.x or later/ Pentium III 500 MHz or above or equivalent AMD/ 64MByte video memory or above
|Software (FW-Manager 3.xx)||Supports 16, 25, 36, 64, 128 & 256 ch (sold separately, 9ch freeware available)|
Full-featured PC NVR with matrix functionality
(Minimum PC requirement-XP, 2000/Pentium IV 1.6GHz or above/256MByte
RAM or above/ 64 MByte video memory or above/CDROM
|System Integration features||[Protocol]|
HTTP, TCP/IP, ARP, ICMP, Telnet, Ftp, PPPoE, SMTP, DHCP, NTP
Open HTTP API/ActiveX for live-cast
|Installation and Maintenance||Configuration: installation wizard, HTTP, telnet and console|
Upgrade firmware: HTTP, telnet & ftp
|Misc||Date and time can be synchronized with an external NTP server|
Live-cast for up to 32 clients
|System Hardware||32bit RISC Processor/Embeded Linux/32MByte SDRAM/ 4MByte Flash DC 12V/350mA, 32-122 F (0~50 C), 20-80% RH|
|Approvals||MIC, FCC, CE, RoHs|
|Connectors||10/100 BaseT Ethernet (auto-sensing)|
1 opto-coupled inputs or 1 digital inputs
1 relay outputs
Reset button for factory default
1 serial port (COM: RS-232)
|Image sensor||1/4 inch format CMOS type (progressive scan)|
Sensitivity: 1500 mV/lux.sec
MAX Active pixel resolution: 625x488
S/N ratio: 46dB
White Balance: AWB
|Lens||Focal Length: 4.3mm|
Back Focal Length: 6.3mm
Angle of View: 78"-, 61"-(Diagonal)
|Image settings||Image flip (vertical)|
|Dimension||90(W) x136(D) x 40(H) (in mm)|
FW-1120 main application is to monitor remote facility over the TCP/IP network where faster video frame rate or single channel of video monitoring is required.
- Home security.
- Small store monitoring.
- Unmanned facility monitoring.
- Building Automation.
- Access Control.