FlexWATCH We Make Internet Much Easier and More Friendly   SEYEON Technology




Network Video Server:
FW3110
FW3450

Network Camera
FW1120
FW1130S
FW1131S

Network Video Recorder
FW5450
FW5850

Network Video Decoder
FW2140

Accessories
FW Voice Kit

S/W Product
FW-Manager


Home


    Key Features
    ________________________

    4 channel video server
    4 Network Channels/1 ch Video-output, Loop-through

    Supports bi-directional voice
    With V10s (Voice Kit).

    Full Frame rate
    Up to 120/100 fps (NTSC/PAL) @ CIF
    Up to 30/25 fps (NTSC/PAL) @ 4CIF.

    Various Display Mode
    1 Channel/quad/sequence

    Supports dynamic IP
    With AOIP service, any type of IP can be supported.

    Supports PTZ keyboard
    Control PTZ device on network video server
    Model: DCK-255.

    Supports serial transparent mode
    Provide serial command by passing mode
    Through this mode, users can adopt any serial device.




Dimension & Images
140(w) x 145(D) x 44(H) (in mm)/435g
Applications
FW-2140 can convert not only video, but also serial command into a networked data.
Analog Video Extension

FlexWatch makes it possible to overcome limit of analog CCTV cabling.
We have NMD (Network Media Decoder) which is a counter part of NVS (Network Video Server) or NC (Network Camera). It convert network video into analog NTSC/PAL signal. With this solution, you can monitor remote site and control remote PTZ without a PC and your remote DVR can record video from remote site.


Specifications

Video Compression M-JPEG
Resolution 4CIF - 704x480 (NTSC) / 704x576 (PAL)
2CIF - 704x240 (NTSC) / 704x288 (PAL)
CIF - 352x240 (NTSC) / 352x288 (PAL)
VGA-640x480
QVGA-320x240
Frame rateUp to 120/100 fps @ 4CIF
Up to 30/24fps @ 4CIF
Network through-put controlFrame rate control/Bandwith control
Audio SupportV10s (Voice Kit) supported
UART supportConsole
PTZ (PTZ keyboard, DCK-255)
Voice Kit (V10s)
Transparent mode (By-pass command to control UART device)
Alarm management LED, OSD & beep supported
Dynamic IP supportAOIPTM (Always On-IP)
Software (default web interface)Live-cast and PTZ control through Web browser with audio
(Minimum PC requirement - XP, 2000, Vista/IE 6.x or later/Pentium III 500MHz or above or equivalent AMD/64MByte RAM or above)
System intergration features[Protocol]
HTTP, TCP/IP, ARP, ICMP, Telnet, Ftp, DHCP
[SDK]
Open HTTP CGI for channel & display control
Installation and maintenanceConfiguration: installation wizard, HTTP, telnet and console
Upgrade firmware: HTTP, telnet & ftp.
System Hardware32bit RISC Processor/Embeded Linux / 32 MByte SDRAM/ 4MByte Flash DC 12V/450mA, 32~122 F (0~50C), 20~80%RH
ApprovalsFCC, CE
AccessoriesCD with installation wizard/ User's manual/ Quick installation guide/ SMPS 12V (800mA) [AC100-240V, 50/60Hz]/Power cord
Connectors1 composite output (75 ohm/Hi-Z)
10/100 BaseT Ethernet (auto-sensing)
Reset button for factory default
2 serial port(COM: RS-232, AUX: RS232 or RS-485)
Dimension 140(W) x 145(D) x 44(H) (in mm)
Weight 435g (.96lbs)