| Video Compression |
M-JPEG/MPEG-4 |
| Audio Compression |
ADPCM IMA 8Kbps |
| Analog Channels |
4ch Video Input/ 1 Ch Video-output (loop-through, Quad)
4ch Audio input/ 1 Ch audio output |
| Compression Level |
6 levels (low compression/highest/high/normal/low/lowest) |
| Resolution |
4CIF-704x480 (NTSC)/ 704x576 (PAL)
2CIF-704x240 (NTSC)/704x288 (PAL)
CIF-352x240 (NTSC)/352x288 (PAL)
QCIF-176x112 (NTSC)/176x144(PAL)
|
| Live Casting |
Up to 120 fps @ CIF (12.5KB) when simplex |
| Network through-put control |
Frame rate control/Bandwith control/CBR |
| Audio |
Full duplex live audio |
| PTZ support |
Built-in PTZ device protocol with more than 30 different PTZ protocols from Pelco, Vicom, Kalatel, Sony, Panasonic, Canon, Honeywell |
| UART support |
Console
By-Pass command to control UART device
X10 device command to control device over power line
Modem (support PSTN, ISDN or GSM) |
| Alarm Management |
[Trigger]
Video loss/Video recovered/ Motion detection (144 area)/ 4 alarm inputs/ Boot finished/ serial input/ Schedule/ Trigger combination is possible
[Service]
Image holding service (Max 23.2 MBytes pre-post alarm buffer)
Image upload service through E-mail/FTP (support pre & post)
Notification service through TCP/UDP/HTTP/4 alarm outputs |
| Dynamic IP support |
IP notification by e-mail
AOIPTM (always On-IP, http://www.aoip.com.kr) |
| Security |
Channel based user password protection for Live-cast, PTZ, Alarm-output and audio |
| Software (default Web interface) |
Live-cast and PTZ control through Web browser with audio
(Minimum PC requirement-XP, 2000, Vista/IE 6.x or later/Pentium III 500 MHz or above
Equivalent AMD/64Mbyte RAM or above
|
| Sofware (FW-Manager) |
Supports 16, 25, 36, 64, 128 & 256 ch (sold separately, 9ch freeware available)
Full-featured PC NVR with matrix functionality
(Mininum PC requirement-XP, 2000/Pentium IV 1.6GHz or above/256MByte RAM or above/64MByte video memory or above/CDROM) |
| System Integration features |
[Protocol]
HTTP, TCP/IP, ARP, ICMP, Telnet, FTP, PPPoE, SMTP, DHCP, NTP
[SDK]
Open HTTP API/ActiveX for live-cast with audio, playback & PTZ
[Service]
Image upload service/notification service |
| Installation and maintenance |
Installation and maintenance
Configuration: installation wizard, HTTP, telnet and console
Upgrade firmware: HTTP, telnet & ftp
|
| Misc |
Timestamp on video
Transmit serial input data with video
Different time zones are supported
Date and time can be synchronized with an external NTP server
Live-cast for up to 32 clients
|
| System Hardware |
32bit RISC Processor/Embeded Linux/ 64Mbyte SDRAM/8MByte Flash DC 12V/1.5A, 32~122F (0~50 C), 20~80% RH
|
| Approvals |
MIC, FCC, CE, RoHS
|
| Accessories |
CD with installation wizard/ User's manual/ Quick installation manual/ SMPS 12V(3A) [AC100~240V, 50/60Hz]/ Power cord/ LAN cable
|
| Connectors |
4 video inputs & 1 composite output, Quad display(75 ohm/Hi-Z)
10/100 BaseT Ethernet (auto sensing)
4 opto-coupled inputs or 4 digital inputs (NC/NO selectable)
4 relay outputs
4 audio input/ 1 audio output
Reset button for factory default
2 serial port (COM: RS-232, AUX: RS-232 or RS-485)
|
| Dimension |
140(W)x 155(D)x 45(H) (in mm)/ 19" 1U Rack mount kit
|
| Weight |
600g (1.32lbs)
|
