home security systems, business security systems
BernClare Multimedia Inc.
Markham, Ontario, Canada
Tel: 905-513-2722
info@bernclare.com
      business and home security, surveillance equipment     
Geovision IP Decoder Box
GV DVR software V8.4 and up support all GV-IP cameras
GeoVision Security Surveillance product for:
System integrators, installers, dealers, web designers, resellers, IT personnels, users experienced in networks.
Home:
www.remote-security.com
or
www.bernclare.com






Software Features PC requirement FAQ & Support Software update Ordering




GV-IP Decoder Box


Introduction

The GV-IP Decoder Box is designed to decode incoming IP Streams from Geovision and third-party IP devices. The box diplay out to a digital or an analog monitor.
The GV-IP Decoder Box provides a cost-effective solution to video surveillance. The security administrator can monitor channels, take snaphots of critical moments and pause at a channel when events occur all through the supplied remote control.
Connected Geovision PTZ cameras such as GV-PTZ010D, GV-PT110D and GV-IP Speed Dome can also be controlled through GV-Joystick.




    Features
  • Decode video streams in H.264 codec at a maximum frame rate of the IP device
  • Decode up to 5 megapixel IP cameras
  • Decode up to 64 IP streams
  • Support for 3rd party IP cameras that adhere to RTSP, ONVIF or PSIA
  • Support for 10/100 Ethernet over LAN
  • VGA and High Definition Video outputs
  • Video output resolution up to 1080p
  • Support for GV-Joystick control of GV PTZ cameras (GV-PTZ010D and GV-PT110D) and GV-IP Speed Dome
  • Suppot for remote firmware upgrade, IP address configuration and add addition of new channel
  • Display of Matrix view through GV-Mobile Server
  • IR remote control
  • SD card and USB drive for snapshot storage and firmware upgrade
        *No SD/SDHC card slot & local storage function for Argentina



The GV-IP Decoder Box is compatible with:
1. Most Geovision IP devices (of the indicated firmware versions) using H.264 codec, and
2. Third-party IP devices that support H.264 and adhere to RTSP, ONVIF or PSIA.
Supported GeoVision IP Devices
Device Type Models Firmware Versions
Box Camera GV-BX110D V1.08 or later
All models
(except GV-BX110D)		V1.06 or later
Bullet CameraGV-BL110DV1.08 or later
All models
(except GV-BX110D)		V1.06 or later
Cube Camera
Fixed Dome
Vandal Proof IP Dome		All modelsV1.06 or later
Mini Fixed DomeGV-MFD110V1.08 or later
All models
(except GV-MFD110)		V1.06 or later
PT Camera
PTZ Camera		GV-PT110D
GV-PTZ010D		V1.08 or later
Speed DomeAll modelsV1.02 or later
Video ServerGV-VS04HV1.04 or later
Video ServerGV-VS11V1.0 or later
Video ServerGV-VS12V1.05 or later
Compact DVRGV-Compact DVR V3 series onlyV1.0 or later
Important: The connected GeoVision and third-party channels must be set with H.264 codec to be compatible.


Video
Video CodecH.264
Video Output at 60HzHigh DefinitionVGA
480p640x480
720p1024x768
1080i1280x768
1080P1366x768
Network
Interface 10/100 Ethernet
Protocol TCP, RTSP, ONVIF, PSIA
Mechanical
IR Remote ControlYes
Connectors Power12V DC Jack
EthernetRJ-45
Monitor OutputHigh Definition, VGA
Local Storage & FirmwareUSB slot (2.0 backward compatible, FAT32 format)
upgradeSD card slot(for class 6 or above, FAT 32 format)
General
Operating Temperature0°C~40°C/32°F~104°F
Operating Humidity20% ~ 80%
Dimensions (WxHxD)182.5x29x141.5mm/7.19x1.14x5.58in
Net Weight615g/1.36lb
PowerDC12V
Power Consumption36W (max. 3A at 12V DC)
RegulatoryCE, FCC compliant


To decode and display non-H.264 IP channels or analog channels, connect the devices to GV-System and access them through GV-Mobile Server. The supported devices are listed below.
Supported Devices Connected to GV-System
Analog Cameras
All models of GeoVision IP cameras, GV-Video Server, GV-Compact DVR, GV-IP Speed Dome, GV-Smart Box and GV-DSP LPR
11 brands of third-party IP cameras. For detail, see http://www.geovision.com.tw/english/4_21.asp
Note:Specifications are subject to change without notice.