FlexCAM 100
FlexWATCH-CAM 100 is an IP based remote security surveillance computer with web server housed in a camera. It has one CCD camera with input for three additional NTSC/PAL cameras that supports Pan-tilt-zoom. The small in-camera server has memory RAMs that provides IP address and a standard web page for server output. Users can configure and store their IP address and their own web page as well. This "camera" has input/ouput for IP, RS232 (for hyper terminal), modem, and in the case of CAM-100, RS485 (pan tilt zoon control), 3 additional camera inputs and relay alarm input. The camera can transmit up to 30 frames per second of clear JPEG video at 320x240 pixels, less frame rate at 704 x 480 pixels.
Any user can get the remote security surveillance video data vividly by web browser and the IP address. There is no need to prepare any special software for the access. All what the user need is a web browser such as Internet Explorer or Netscape. FlexWATCH-CAM is the true state of art video monitoring technology.
If you have an IP network, you can set up this camera and get going in less than an hour. If you can assign a fixed IP address to the camera, you can use web browser to view and control your Flex-watch remote security surveillance all over the world. If you do not have a fixed IP address, you can get onto our "AOIP" or "Always-on IP" program to view and control your camera outside of your LAN.
Technical Specifications:
- KEY FEATURES
Self contained system
- All in one package
- Stable and Reliable system based on RISC
hardware Supports various protocols
- HTTP, TCP, IP, ftp, telnet, ARP, RARP, PPP, PAP, CHAP, JAVA, etc.
- SPECIFICATION
System Configuration
- 32bit RISC CPU
- Hardware Motion JPEG engine
- Flash Memory : up to 2Mbytes
- SDRAM : up to 16Mbytes
- PROTOCOLS
- HTTP, TCP/IP
- ftp, telnet, ARP, RARP, PPP, PAP, CHAP, JAVA, etc.
|
Click on this image to download the bitmap screen shot
On the actual program you can click on each camera view to see it with 720x480 resolution
|
- COMPRESSION
- Real-time image compression up to 30 frames/sec
- Image quality : 5 levels (highest, high, normal, low, lowest)
- Image resolution : 640x480, 320x240, 192x144 (Max 720x480)
- PERFORMANCE
- Decoding rate at LAN : max 15 frames/sec at 320x240 mode (it depends on PC performance)
- Reliable number of connecting users : up to 30 users
- CCD MODULE

- FlexWATCH-CAM 100 (high-end version) 1/3 inch CCD, 410,000 pixels
Lens mount : C mount, 6mm lens
Sensitivity : 0.8 Lux at F1.8
Auto Iris : Electronic Shutter |
- MANAGEMENT
- Configurable by serial or LAN port
- Remote Flash memory update (e.g., system, web-page or so)
- LAN INTERFACE
- 10BastT Ethernet, 100BaseT Fast Ethernet COM interface
- RS-232 for console or modem (PSTN/ISDN) connection
- AUX INTERFACE
- PTZ support(CAM 100 only)
- RS232, RS-485 bus
- ALARM I/O INTERFACE
- Two Opto-isolated inputs
- Single Relay output
- HIGH SPEED JPEG COMPRESSION engine
- International standard, Motion JPEG
- Real-time image compression and transmission up to 30 frames per second @ 320 x 240 pixels
- Less frame rate at 704 x 480 pixels
- EASY ACCESS
- Internet Explorer 4.0 or higher, Netscape 4.0 or higher
- No plug-in S/W for the monitoring
- AUXILIARY VIDEO-IN & OUTPUT
- Three video-in (CAM 100)
for analog camera support
- Single video-output (loop-through)
- SECURITY
- Access authority : user level, administrator level
- PAP, CHAP protocols support
- DIMENSION
- 15cm (L) x 9.5cm (W) x 4.5cm (H)
- Weight : 0.8kg without power supply
- MISC.
- LAN/serial/PTZ/Alarm : RJ-45 connector for easiness
- Provides proprietary software & cables
- Power : DC 12.0 Volt, 850 mA
Setup Configuration:
- PSTN/ISDN SETUP DEMO
- ADSL/CABLE MODEM SETUP DEMO
-
LAN/LEASED LINE
JUST PLUG IN THE SOCKET
Live Demo
FW-100 Spec Sheet
|