Easy installation and configurations
Simply connect it to FlexWATCH™ network camera through RS-232 cable and configure FlexWATCH™ system.
Works on MS Internet Explorer ( No proprietary program)
Once configuration is done, simply run your web browser,view live,hear & talk through FW-Voyager mode.
Two way communication
It supports full duplex voice communication which means that you can talk while you are hearing. It is like a normal telephone communication.
Low bandwidth requirement(5Kbit)
Unlike other Voice Codec, it use G.723 international standard voice Codec which is widely used in Voice over IP system. Thus, it consumes less than 10k bits of bandwidth which means you can get clear Voice even under low bandwidth of internet line along with Video
External speaker and microphone interface
Through External microphone and speaker connected to FW-V10, you can hear and talk over the TCP/IP network.
Remote System management
All the system configuration and upgrade can remotely be done over the TCP/IP network through Web or Telnet.
FW-V10 enables you to add Voice capability to your visual remote monitoring over the TCP/IP network. It can be placed anywhere together with FlexWATCH™ network camera or video server series as long as you want to view, hear & talk. Major applications are as follow.
- Elderly care service or Nursery home service
- Any Security application which require voice capability
- Visual and Voice enabled conference between branch office.
Configuration DiagramFlexWATCH V10 Spec Sheet